National Credential
Credential: Pneumatic Mechanic (PM)  GI Bill resource
Credentialing Agency: International Fluid Power Society (IFPS)

The International Fluid Power Society (IFPS), Pneumatic Mechanic (PM) certification is for professionals in the fluid power and motion control industry who fabricate, assemble, test, maintain, and repair systems and components. PMs understand hydraulic symbols, read system schematics, and are skilled in using hand tools, power tools, micrometers, and testing equipment. To earn the PM certification, candidates must pass a written exam and a job performance exam.

More information can be found on the certifying agency's website.

Renewal Period: 5 years

Pneumatic Mechanic (PM)

The following Navy Occupations provide training and/or experience that contributes to attaining this credential:

Personnel Category Occupation Occupation Type Related As Navy$ Gap Analysis LaDR
Enlisted ABE-Aviation Boatswain's Mate, Launching and Recovery Equipment Rating most  Navy Bucks    E3 Pay Grade
Enlisted AM-Aviation Structural Mechanic Rating other      
Enlisted AS-Aviation Support Equipment Technician Rating some  Navy Bucks    E3 Pay Grade
Enlisted GSM-Gas Turbine System Technician Mechanical Rating some  Navy Bucks    E2 Pay Grade
Enlisted MT-Missile Technician (Submarines) Rating some  Navy Bucks    E4 Pay Grade
Enlisted LCAC - Landing Craft Air Cushion Deck Engineer Out of Rate Assignment most  Navy Bucks    

Navy Occupations Table Legend


Related As

The military occupations shown in this table are related to this credential in one of three ways: Most, Some, or Other.

Most: This credential is directly related to most of the major duties associated with the military occupation (at least 80%). Note that the credential may require additional education, training or experience before you are eligible for it.

Some: This credential is related to some tasks associated with the duties of the military occupation (related 80% to at least one or more critical tasks but less than 80% of all of the entire military occupation). Note that the credential may require additional education, training or experience before you are eligible for it.

Other: This credential is related to this military occupation, but is more advanced or specialized and therefore will most likely require additional education, training, or experience.

Navy$ Navy Bucks icon

This Credential has been approved for payment through the Navy's Credential Program Office. Note that to be eligible for Navy funded credentials, you must have demonstrated competency and experience towards the credential being sought. This credential may require additional work to fully meet competency and experience requirements.

To get a voucher request form, click "Complete Voucher and Apply" at the top of any page.

Gap Analysis Has Analysis icon

A detailed analysis comparing the credential requirements to the military occupation has been completed. Click on the gap analysis icon to view the analysis page.

LaDR LaDR Pay Grade E5 icon

LaDR (Learning and Development Roadmap) icons call out credentials that are "highly recommended" (but not mandatory) for a particular pay grade because they complement the training, experience, and competency of that paygrade. You are NOT restricted from attempting credentials recommended for senior & junior pay grades (as long as you meet all eligibility requirements).

Coming Soon – view the civilian occupations related to this certification!

Civilian Occupations Table Legend


Bright Outlook Bright Outlook icon

The Bright Outlook icon indicates that new job opportunities are very likely in the future for this job.

Registered Apprenticeship Apprenticeship icon

The Registered Apprenticeship icon indicates that this job has an apprenticeship program registered with the U.S. Department of Labor.

Local Salary Information

Click the links in this column to go to the My Next Move for Veterans web site to view salary and employment information for the job.

Pneumatic Mechanic (PM)

Eligibility Requirements ()

Note: This credential may have multiple options for becoming eligible. Listed below are the minimum requirements based on the minimum degree required. To view other options, see the Eligibility tab.

  • Credential Prerequisite
  • Experience
  • Education
  • Training
  • Membership
  • Other
  • Fee

Exam Requirements ()

  • Written Exam
  • Oral Exam
  • Practical Exam
  • Performance Assessment

Renewal Period: 5 years

  • Continuing Education
  • Exam
  • Continuing Education OR Exam
  • Fee
  • Other

International Fluid Power Society (IFPS)
P.O. Box 1420
Cherry Hil, NJ  08034-0054
Phone: (800) 308-6005
Fax: (856) 424-9248
Email: Askus@ifps.org

Pneumatic Mechanic (PM)

  • Preventive Maintenance
  • Assemble Components
  • Field Repairs
  • Major Repairs
  • Minor Repairs
  • Replace Components
  • Troubleshooting

The job performance assessment consists of the following six stations:

  • Identify Fluid Power Symbols
  • Identify Fasteners and Fittings
  • Use of Multimeter
  • Measure a Pump Piston and Spool
  • Fluid Conductors
  • Tube Bend and Flare

There are a number of resources available to help you prepare for the Pneumatic Mechanic (PM) examination:

An additional resource is Safari Books Online, a searchable digital library that provides online access to thousands of books, training videos and conference sessions. See the Educational Resources page here on COOL to learn how to get free access.

Pneumatic Mechanic (PM)

Renewal Period: 5 years

The Pneumatic Mechanic (PM) credential has the following recertification information:

  • The PM certification is renewed every five years by completing 15 professional development points (PDPs) and paying a recertification fee. Additional information can be found on the IFPS website.

Pneumatic Mechanic (PM)

Additional considerations for the Pneumatic Mechanic (PM) include:

  • Individuals who hold the IFPS Industrial Hydraulic Mechanic (IHM), Mobile Hydraulic Mechanic (MHM), and Pneumatic Mechanic (PM) certifications earn the Fluid Power Master Mechanic (MM) designation. Navy COOL can provide funding for maintaining the Fluid Power Master Mechanic (MM) designation for eligible Sailors.