International Fluid Power Society (IFPS)

Mobile Hydraulic Technician (MHT)


Credential: Mobile Hydraulic Technician (MHT)  GI Bill resource
Credentialing Agency: International Fluid Power Society (IFPS)

Renewal Period: 5 years

The International Fluid Power Society (IFPS), Mobile Hydraulic Technician (MHT) certification is for professionals in the fluid power and motion control industry who test and troubleshoot operational mobile hydraulic systems and applications. MHTs demonstrate the ability to read mobile schematics, oversee system installations and commissioning, and conduct cylinder and hydraulic motor calculations. Candidates must pass a written and performance exam.

More information can be found on the certifying agency's website.

Mobile Hydraulic Technician (MHT)

MINIMUM REQUIREMENTS

Attainability:    high

Eligibility Requirements (View Details)

  • Credential Prerequisite
  • Experience
  • Education
  • Training
  • Membership
  • Other
  • Fee

Note: This credential may have multiple options for a Service member to meet eligibility requirements. Requirements listed here are based on the minimum degree required.

Exam Requirements (View Details)

  • Exam
  • Written Exam
  • Oral Exam
  • Practical Exam
  • Performance Assessment

Exam Administration (View Details)

  • In-person exam
  • Remote proctored on-line exam
  • Third-party test vendor

RECERTIFICATION SUMMARY

Renewal Period: 5 years

  • Continuing Education
  • Exam
  • Continuing Education OR Exam
  • Fee
  • Other

AGENCY CONTACT INFORMATION

International Fluid Power Society (IFPS)

1930 East Marlton Pike, Suite A2
Cherry Hill, NJ  08003

Phone: (800) 308-6005

Fax: (856) 424-9248
Email: Askus@ifps.org

Written Exam

  • Maintenance
    • Replace an S AE straight thread O-ring
    • Tighten a 37° JIC flare fitting
    • Tube flaring
    • Make up a tube assembly
    • Install a brazed O-ring face sealing fitting (ORS)
    • Install a four bolt flange fitting
    • Align hoses and fittings
    • Align hoses and fittings
    • Make up a crimped hose assembly
    • Inspect a hydraulic cylinder for external leaks
    • Inspect a cylinder for binding
    • Check rod seals and packings for wear
    • Adjust a hydraulic packing gland
    • Inspect directional control valves for external leaks
    • Inspect pumps and motors for leaks
    • Set the pressure on a relief valve
    • Charge a hydro-pneumatic accumulator
    • Verify the condition of hydraulic fluid
    • Add hydraulic fluid to the reservoir
    • Check the condition of hydraulic filters
    • Replace hydraulic filter elements
    • Test petroleum fluid for water
    • Check the reservoir for silt buildup
    • Draw a fluid sample from the reservoir
    • Draw a fluid sample from a pressure line
    • Examine hydraulic fluid for contamination
    • Drain, flush, and refill a system
  • Field Repairs
    • Replace a hose assembly
    • Verify operating pressure with a gauge
    • Verify relief valve setting
    • Replace a hydraulic cylinder
    • Check cylinder alignment and mounting
    • Check directional control valve solenoids
  • Shop Repairs
    • Replace a hydraulic pump unit
    • Hydrostatic System Start-up
    • Replace a directional control stack or module valve
    • Mount a pump and align the coupling
    • Replace a hydraulic motor unit
    • Replace a pressure relief valve
    • Install an overhaul kit in a hydraulic cylinder
    • Set fixed displacement pump load sensing valve
    • Set variable displacement pump compensator pressure
  • Troubleshooting
    • Determine why a cylinder will not extend
    • Determine the cause of no, low, or high pressure
    • Identify components in a circuit diagram
    • Determine why a cylinder fails to hold the load
    • Determine why system operation is erratic
    • Determine the cause of excessive heat
    • Determine the cause of no flow, low flow, or high flow
    • Determine the cause of excessive noise
    • Determine the cause of excessive vibration
    • Determine cylinder rod and barrel damage
    • Verify system operating cycle times
    • Determine cylinder bypass leakage
    • Determine the cause of pump vibration
    • Determine why a hydraulic cylinder binds
    • Isolate solenoid control valve failure
    • Verify hydraulic check valve installation and assembly
    • Isolate problems using circuit diagrams
    • Troubleshoot hydrostatic transmissions
    • Troubleshoot a proportional directional control valve

Practical Exam

  • Station # 1 Identify Fluid Power Symbols:
    • Identify 20 components by their symbolic representation on a schematic drawing. The schematic at this station will be either Mobile Hydraulic, Industrial Hydraulic, or Pneumatic depending upon your test. You will be required to give a written explanation for each component. This is not a multiple choice station.
  • Station # 2 Identify Fasteners and Fittings:
    • This station hasten ten fasteners and ten fittings that require identification as to type, size, length, thread, and grade. Each item has five multiple choice answers from which to choose.
  • Station # 3 Use of Multimeter:
    • This station is for testing the candidate in the use of a Multimeter.  There are 14 questions for readings taken on a test circuit board.  It is not multiple choice. The readings are for voltage, amperage, and resistance.
  • Station # 4 Measure a Pump Piston and Spool:
    • This station tests your ability to take measurements of a part that range from 1/16” to .0001” and requires using scales, calipers, and micrometers. A pump piston and a hydraulic valve spool are used for the measurements. This is not a multiple-choice station.
  • Station # 5 Fluid Conductors:
    • Requires identifying size, type, and pressure ratings of two steel tubes, two rubber hoses, one copper, and one nylon tube. Dial calipers and data sheets are provided to aid in this task. This station is not multiple choice.
  • Station # 6 Tube Bend and Flare:
    • Bend and flare a tube assembly to fit a fixture testing the skills of measuring, cutting, flaring, and assembly for compound bending to fit a fixture. All tubing, tools, and data sheets are provided.

Exam Preparation Resources

There are a number of resources available to help you prepare for the Mobile Hydraulic Technician (MHT) examination:

An additional resource is O'Reilly Learning Safari Books Online, a searchable digital library that provides online access to thousands of books, training videos and conference sessions. See the Educational Resources section on the Related Sites page here on COOL to learn how to get free access.

Testing Information

  • Exam Administration

    Credential exams may be administered in-person at a testing site, proctored on-line remotely, or have options for both. If an exam is administered through a test vendor, the third-party test vendor box will be checked. The following test administration options apply to the Mobile Hydraulic Technician (MHT) credential where checked:

    • In-person exam
    • Remote proctored on-line exam
    • Third-party test vendor
  • For more information on the International Fluid Power Society (IFPS) testing process, visit the agency website.

RECERTIFICATION

Mobile Hydraulic Technician (MHT)

Renewal Period: 5 years

The Mobile Hydraulic Technician (MHT) credential has the following recertification information:

  • The MHT certification is renewed every five years by completing 30 professional development points (PDPs) and paying a recertification fee. Additional information can be found on the IFPS website.

Additional considerations for the Mobile Hydraulic Technician (MHT) include:

  • Professionals who hold the IFPS Industrial Hydraulic Technician (IHT), Mobile Hydraulic Technician (MHT), and Pneumatic Technician (PT) certifications earn the Fluid Power Master Technician (MT) designation. Navy COOL can provide funding for maintaining the Fluid Power Master Technician (MT) designation for eligible Sailors.

In Demand

This certification is considered in demand. The U.S. Department of Labor sponsored CareerOneStop's analysis indicates the certification is frequently mentioned in online job postings.

Click for external link to CareerOneStop's Credentials Center.

COOL Bucks

See your installation Education Service Officer for credential exam information and coordinating instructions.

COOL Summary

Click to go to the COOL Summary page for this MOC.

COOL Summary

Click to go to the COOL Summary page for this MOC.

COOL Summary

Click to go to the COOL Summary page for this MOC.

COOL Summary

Click to go to the COOL Summary page for this MOC.

Some

Credential is related to some tasks associated with the duties of the military occupation (at least one critical task but less than 80%)

Most

Credential is directly related to most of the major duties associated with the military occupation (at least 80%)

Other

Credential is related to this military occupation, but is more advanced or specialized and therefore will likely require additional education, training, or experience

CA Eligible

This certification is eligible for CA.

Star

Star credentials are MOS enhancing, as designated by the Proponent. MOS enhancing credentials are directly related to an MOS or ASI, are taught either partially or completely as part of a Program of Instruction (POI), and improves the MOS technical proficiency.

Skill Level

The Skill Level reflects the level, based on MOS training and/or experience, the Soldier should be the most prepared to successfully earn the credential. See the Table Legend for details about each level.

Navy Bucks

Credential voucher or reimbursement for credential exam, re-certification, or maintenance fee has been approved for payment through the Navy's Credential Program Office. To get a voucher request form, click Menu at the top of any page, then click "2 Complete Voucher and Apply" under Credentialing Steps.

CG Bucks

Current Coast Guard policy states all credentials listed on CG COOL may be reimbursed assuming the enlisted service member meets the eligibility requirements as outlined in the Coast Guard Voluntary Credentialing Program Policy (COMDTINST 1540.1(series))

Early Career

1-3 years experience; Enlisted E1 through E4

Mid Career

4-10 years experience; Enlisted E5 through E6

Late Career

10+ years experience; Enlisted E7 through E9

Early Career

1-3 years experience; Enlisted “A” School through E5

Mid Career

4-10 years experience; Enlisted E6 through E7

Late Career

10+ years experience; Enlisted E8 through E9

Early Career

1-6 years experience; Officer O1 through O2

Mid Career

6-12 years experience; Officer O3 through O5

Late Career

12+ years experience; Officer O6 and Above

LaDR

This credential is recommended on the rating Learning and Development Roadmap (LaDR) for Sailors currently in the pay grade indicated on the icon, BUT MAY BE TAKEN BY SAILORS IN OTHER PAY GRADES.

Click for more information.

GI Bill®

Reimbursement for exam fees has been approved for payment through the GI Bill.

Note: GI Bill approval data is updated quarterly. For the latest information, visit the WEAMS Licenses/Certifications Search page. Make sure to select "Both" in the LAC Category Type drop-down before searching.

Click to go to the external link for GI Bill licensing and certification information.

ANAB (ANSI)

This credential has been accredited by ANAB (ANSI).

Click to go to the external ANAB web site.

ICAC

This credential has been accredited by ICAC.

Click to go to the external ICAC web site.

ABSNC

This credential has been accredited by ABSNC.

Click to go to the external ABSNC web site.

NCCA

This credentialing program has been accredited by NCCA.

Click to go to the external NCCA web site.

IAS

This credential has been accredited by IAS.

Click to go to the external IAS web site.

Low

May be difficult to attain: minimum education requirement is a Bachelor's degree, and/or minimum experience is 10 or more years.

Note: In some cases “years of experience” refers to time actively on duty or while holding a certain occupation or prior certification and not always in consecutive calendar years. Additional years required for certain preliminary stages may not be included in this classification. For requirements measured in hours, 1080 hours was considered a year. For days, 365 days was considered a year. Please review all prerequisites and requirements for eligibility, and additional information for details.

Medium

Moderate ease of attainment: minimum education requirement = Associate's and/or prerequisite and/or minimum experience = more than 2 years and less than 10 years of experience.

Note: In some cases “years of experience” refers to time actively on duty or while holding a certain occupation or prior certification and not always in consecutive calendar years. Additional years required for certain preliminary stages may not be included in this classification. For requirements measured in hours, 1080 hours was considered a year. For days, 365 days was considered a year. Please review all prerequisites and requirements for eligibility, and additional information for details.

High

Highly attainable: minimum education requirement = HS or less and/or minimum experience = 2 years or less experience and no additional requirements.

Note: In some cases “years of experience” refers to time actively on duty or while holding a certain occupation or prior certification and not always in consecutive calendar years. Additional years required for certain preliminary stages may not be included in this classification. For requirements measured in hours, 1080 hours was considered a year. For days, 365 days was considered a year. Please review all prerequisites and requirements for eligibility, and additional information for details.

MOS is Military Occupational Specialty
ASI is Additional Skill Identifier
WOMOS is Warrant Officer Military Occupational Specialty
AOC is Area Of Concentration Officer
Functional Area
Branch

Army e-learning

State-of-the art Computer Based Training available for free to the Army Workforce. Click for more information.

Click here for more information.

NKO e-learning

$$ELEARN_NKO_DESC$$

Bright Outlook – new job opportunities are very likely in the future for this job

Registered Apprenticeship

An apprenticeship program is registered with the U.S. Department of Labor. Go to the Apprenticeship Finder and enter career path or location to find apprenticeship opportunities.

Click here for External link to: My Next Move for Veterans - Mobile Heavy Equipment Mechanics, Except Engines
Click here for External link to: My Next Move salary info for Mobile Heavy Equipment Mechanics, Except Engines

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Mobile Heavy Equipment Mechanics, Except Engines

This is an official U.S. Navy website
Updated: January 29, 2021
Top