AS-Aviation Support Equipmentman / Medium/Heavy Truck - Preventive Maintenance Inspection (PMI) (T8) Analysis
Military Training: AS-Aviation Support Equipmentman
Certification: Medium/Heavy Truck - Preventive Maintenance Inspection (PMI) (T8)
Certifying Agency: National Institute for Automotive Service Excellence (ASE)
Renewal Period: 5 years
The National Institute for Automotive Service Excellence (ASE), Medium/Heavy Truck - Preventive Maintenance Inspection (PMI) (T8) certification is for individuals who possess knowledge and skills in engine systems, the cab and hood, electrical/electronics, the frame and chassis, and the road/operational test. Candidates must meet experience requirements and pass a written exam.
More information can be found on the certifying agency's website.
Medium/Heavy Truck - Preventive Maintenance Inspection (PMI) (T8)
MINIMUM REQUIREMENTS
Attainability:
Eligibility Requirements (View Details)
- Credential Prerequisite
- Experience: 2 years
- Education
- Training
- Membership
- Other
- Fee
Note: This credential may have multiple options for a Service member to meet eligibility requirements. Requirements listed here are based on the minimum degree required. To view other options, see the Eligibility tab.
Exam Requirements (View Details)
- Written Exam
- Oral Exam
- Practical Exam
- Performance Assessment
Exam Administration (View Details)
- In-person exam
- Remote proctored on-line exam
- Third-party test vendor
RECERTIFICATION SUMMARY
Renewal Period: 5 years
AGENCY CONTACT INFORMATION
National Institute for Automotive Service Excellence (ASE)
1503 Edwards Ferry Road, NE
Suite 401
Leesburg, VA 20176
Phone: (800) 390-6789
Fax: (703) 669-6127
Email: contactus@ase.com
Training and/or Experience REQUIREMENTS
Certification Requirements | Applicable Experience |
---|---|
Candidate must have at least two years of relevant hands-on work experience. |
Individual experience will be assessed by the credentialing agency. |
Note: Formal training is just one method of gaining the knowledge required to pass a credential exam. Other factors that might impact your success in passing the exam can include prior service education, training, and experience; military voluntary education (e.g., coursework, degrees); and on-the-job training and experience.
Written Exam
Written Exam Table 1 of 2
Exam Topics | 35A/36A CRANES | A/S32-31A MAINT | A/S32A-30A IMC | A/S32A-32 INT | A/S32A-37 IMC | A/S32P-25 MAINT | A/S37A-3 MEPP |
---|---|---|---|---|---|---|---|
Engine Systems (20%) | Part | Part | Full | Full | Full | Full | Part |
Cab and Hood (10%) | Part | Full | Full | ||||
Electrical/ Electronics (20%) | Part | Part | Full | Full | Full | Full | Part |
Frame and Chassis (44%) | Part | Full | |||||
Brakes |
|||||||
Drivetrain |
|||||||
Steering, Tires, and Wheels |
|||||||
Suspension, Frame, and 5th Wheel |
|||||||
Road/ Operational Test (6%) | Full |
Full = Navy Training fully covers the exam topic
Part = Navy Training partially covers exam topic
(EMPTY) = Navy Training does not cover exam topic
Written Exam Table 2 of 2
Exam Topics | AS A1 | DA-675/MSM INT | HYD PURIFIER | MEP-009A/105 INT | MMG-1A INT MAINT |
---|---|---|---|---|---|
Engine Systems (20%) | Full | ||||
Cab and Hood (10%) | Full | ||||
Electrical/ Electronics (20%) | Full | Part | Full | Part | |
Frame and Chassis (44%) | Full | Part | |||
Brakes |
|||||
Drivetrain |
|||||
Steering, Tires, and Wheels |
|||||
Suspension, Frame, and 5th Wheel |
|||||
Road/ Operational Test (6%) | Full |
Full = Navy Training fully covers the exam topic
Part = Navy Training partially covers exam topic
(EMPTY) = Navy Training does not cover exam topic
Testing Information
-
Exam Administration
Credential exams may be administered in-person at a testing site, proctored on-line remotely, or have options for both. If an exam is administered through a test vendor, the third-party test vendor box will be checked. The following test administration options apply to the Medium/Heavy Truck - Preventive Maintenance Inspection (PMI) (T8) credential where checked:
- In-person exam
- Remote proctored on-line exam
- Third-party test vendor
For more information on the National Institute for Automotive Service Excellence (ASE) testing process, visit the agency website.
-
Third-Party Test Vendor Information
Testing for this credential is handled by the following vendor:
Prometric
The test centers are located in the U.S.
To find out more, use the following links on the Prometric website:
- Search for Testing Program
- Locate a Test Center
- Agency/Certification Specific Testing Information
- Contact Prometric
RECERTIFICATION
Medium/Heavy Truck - Preventive Maintenance Inspection (PMI) (T8)
Renewal Period: 5 years
Additional considerations for the Medium/Heavy Truck - Preventive Maintenance Inspection (PMI) (T8) include:
- Certification holders who are certified in ASE tests T2 – T8 are recognized as ASE Certified Master Medium/Heavy Truck Technicians. Test T1 is not required for Master Medium/Heavy Truck Technician status. Additional information can be found on the ASE website.