MOS 5954 Air Traffic Control Communications Technician

MOS 5954 Air Traffic Control Communications Technician

MOS Description

Air traffic control communications technicians survey, site, and install air traffic control communications systems. Inspect and perform preventive maintenance for proper operation. Diagnose and repair faults. Provide technical assistance during system flight inspections. Maintain diagnostic tapes, tools, support, and test equipment. Process and pack system components for storage or shipment. Train subordinates or less qualified personnel. Conduct maintenance management. Assist air traffic control maintenance personnel in MOS 5952 and MOS 5953.

In addition to obtaining certifications in your field, advanced education is another way to enhance job performance.

For help in making informed choices on schools and education programs when using tuition assistance, see:

Additional information pertaining to MOS 5954 Air Traffic Control Communications Technician can be found below.

Federal Aviation Administration

At the FAA, Air Traffic Control Specialists (ATCS) have three distinct areas of specialization :

  1. Terminal (Tower) Controllers, who control air traffic at airports and give pilots taxiing and takeoff instruction, air traffic clearances and advice
  2. En Route Center Controllers, who give aircraft instructions, air traffic clearances, and advice regarding flight conditions while en route between airports
  3. Flight Service Station Controllers, who provide preflight, in-flight and emergency assistance to all pilots on request

In addition to an Air Traffic Controller certificate, air traffic control specialists must possess :

  • A rating for the facility to which they are assigned. This facility rating requires a demonstrated knowledge of the kind and location of radio aids to air navigation, the terrain, the landmarks, the communications systems and circuits, and the procedures peculiar to the area covered by the facility. All required certificates and ratings must be obtained within time limits established by the agency management.
  • At least a second class Medical Examination detailed in 14 CFR Part 67. Medical examinations must be conducted by a FAA-designated Aviation Medical Examiner.

Although there are provisions for hiring individuals with no previous air traffic controller experience, as of early 2002, the FAA is only hiring graduates of FAA-approved post-secondary educational programs, current or former federal employees (including former military members eligible for a Veteran's Readjustment Appointment), or Retired Military Air Traffic Controllers for positions in the En Route Center or Terminal specialty areas.

To be eligible for the program, you must meet all of the following criteria :

  • Be on terminal leave pending retirement from active duty military service or have retired from active duty military service on or after September 17, 1999.
  • Have received either an air traffic control specialist certification and/or a facility rating according to FAA standards.
  • Meet all application, qualification and position requirements, including applicable medical and security requirements.

Controllers hired under this program are given time-limited appointments, meaning that their appointments will have a specific termination date attached to them. The initial appointment may be up to 10 years and may not exceed the last day of the month in which the controller turns age 56. Appointments can be extended for up to five years at a time.

You will be required to submit a Retired Military Controller Specialist Job Application and proof of your retired status (Form DD 214). Do not submit the OF-612 federal job application form. Other FAA Application Forms you may need are located at the FAA website.

Eligibility requirements, privileges, and performance standards for Air Traffic Tower Operators and Aircraft Dispatchers are detailed in 14 CFR Part 65.

This is an official U.S. Marine Corps websiteUpdated: July 31, 2020
Top
Click here to go to Associate Electronics Technician (CETa) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Associate Electronics Technician (CETa) is designed for technicians who have less than two years of experience or training in electronics. The CETa is the foundation for ETA’s journeyman, senior, and master specialty, and master certification programs. CETa applicants must meet the experience or training requirement and pass a written exam.
Click here to go to Installer 1 (INST1) COOL Snapshot page.

Renewal Period: Not Renewable

The BICSI Installer 1 (INST1) certification is an entry level credential that demonstrates an ability to understand and apply a comprehensive collection of installation-specific information including pathways, spaces, grounding and firestopping, terminations of copper connectors, and knowledge of codes, standards and best practices.  There are no prior industry installation experience requirements for individuals preparing to sit for the Installer 1 exam, however, candidates must be able to distinguish between different colors, possess manual dexterity to complete fine motor tasks, and be able to lift and carry items up to fifty pounds. To earn a BICSI Installer 1 certification, candidates must successfully pass both a hands-on and a written exam.  Once earned, the credential is valid for three full years.  

Click here to go to Technician (TECH) COOL Snapshot page.

Renewal Period: 3 years

The BICSI, Technician certification validates the ability to understand and apply a wide range of installation-specific information. BICSI Technicians demonstrate their ability to conduct high-level optical fiber and copper installation testing and troubleshooting, to use project management skills to successfully lead and installation team, discuss and assess multiple applications of information and communications technology (ICT) cabling installation, make recommendation using best practices, standards and codes and carry out the job plan and scope of work plus conduct retrofits and upgrades for existing infrastructure. Candidates must pass a written and practical exam.
Click here to go to Certified Satellite Installer (CSI) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Certified Satellite Installer (CSI) certification is an entry-level professional credential for satellite installers. CSI candidates should have knowledge of satellite communications history and theory, satellite dish reflectors, cabling, amplifiers, Satellite System Installation-site surveys, satellite receivers-digital technology, interfacing with other consumer electronics equipment, transmission-internet systems, troubleshooting, repairs, sun outage, safety, and related information. Candidates must pass a written exam.
Click here to go to Telecommunications Electronics Technician (TCM) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Telecommunications Electronics Technician (TCM) is an intermediate-level technician credential for professionals who work in the telecommunications field. TCM candidates must have knowledge of wired and wireless communications basic concepts, which are then applicable to various types of voice, data and video systems. Telecommunications Electronics Technicians must be knowledgeable and have abilities in the following technical areas: Cables and Cabling, Analog Telephony, Equipment, Telecom Safety and Mathematics, Transmission Service Providers and Protocols, Distribution Methods, Computer, Digital Telephony, Interfacing, Internet, Network Infrastructures and Topologies, Office Wiring, Wireless Telephony, Test Equipment, Optical Wiring, and Troubleshooting. Candidates that hold a Standalone TCM and later complete the Associate CET (CETa), are eligible to upgrade to a Journeyman CET.
Click here to go to General Radiotelephone Operator License (PG) COOL Snapshot page.

Renewal Period: Lifetime

The Federal Communications Commission (FCC), General Radiotelephone Operator License (PG) is an intermediate-level technician license. A PG is required to adjust, maintain, or internally repair FCC licensed radiotelephone transmitters in the aviation, maritime, and international fixed public radio services. A PG is also required to operate: any compulsory equipped ship radiotelephone station operating with more than 1500 watts of peak envelope power; and voluntarily equipped ship and aeronautical (including aircraft) stations with more than 1000 watts of peak envelope power. FCC requires candidates to be a legal resident of the United States and be fluent in the English language. Candidates must pass a written exam.
Click here to go to Computer Service Technician (CST) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Computer Service Technician (CST) is an entry-level credential for professionals who supply computer support. The CST exam assesses candidates’ skills in performing hardware servicing and system software skills for personal computers (PCs). CST candidates should have knowledge of PC components, operating systems, basic networking, troubleshooting, and safety procedures. Candidates must pass a written exam.
Click here to go to RADAR Electronics Technician (RAD) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), RADAR Electronics Technician (RAD) is a journeyman-level certification recommended for radar electronics technicians with knowledge of radar basics and concepts applicable to all types of avionics, maritime and land systems. RADAR Electronics Technicians must be knowledgeable and have abilities in the following technical and human relations areas: Block Diagrams and Schematics, Components, Cabling and Antennas, Hand Tools & Soldering, Mathematics, Amplifiers, RADAR Transceivers, Interfacing, Satellite, Wireless, and Data Communications, Computers and Digital Concepts, Software Programming, Troubleshooting, and People Relations. Candidates must hold the Associate Electronics Technician (CETa) certification prior to taking the RADAR exam. Individuals with a valid FCC Element 8, and either the ETA Associate CET (CETa) or a Journeyman (CET) certification, are eligible for a rollover to an ETA RADAR certification. Candidates must take a written exam.
Click here to go to CompTIA A+ ce COOL Snapshot page.

Renewal Period: 3 years

The CompTIA A+ ce certification demonstrates competency as a computer support technician. The A+ ce certification is appropriate for entry-level technicians who perform tasks such as installation, configuration, diagnosing, preventive maintenance and basic networking. Security, safety and environmental issues, and communication and professionalism are also covered. It is recommended, although not required, that candidates have nine to twelve months of related hands-on experience as an IT professional.
Click here to go to GMDSS Radio Maintainer License (DM) COOL Snapshot page.

Renewal Period: Lifetime

The Federal Communications Commission (FCC), GMDSS Radio Maintainer License (DM) is a mid-level license that qualifies personnel as GMDSS radio maintainers to perform at sea repair and maintenance of GMDSS equipment. It also confers the operating authority of the General Radiotelephone Opertaor License (PG) and the Marine Radio Operator Permit (MP). The Global Maritime Distress Safety System (GMDSS) is an internationally agreed-upon set of safety procedures, types of equipment, and communication protocols used to increase safety and make it easier to rescue distressed ships, boats and aircraft. FCC requires candidates to be a legal resident of the United States and be fluent in the English language. Candidates must pass a written exam.
Click here to go to Certified Electronics Technician - Associate-Level (Associate CET) COOL Snapshot page.

Renewal Period: 4 years

The International Society of Certified Electronics Technicians (ISCET), Certified Electronics Technician - Associate-Level (Associate CET), is an entry-level certification for technicians and students with under four years of experience and validates the technician’s knowledge of basic electronics, including math, DC and AC circuts, transistors and troubleshooting. The Associate CET is also a pre-requisite for ISCET Journeyman level certifications. Candidates must pass a written exam.
Click here to go to Certified Electronics Technician - Journeyman-Level - Communications COOL Snapshot page.

Renewal Period: 2 years

The International Society of Certified Electronics Technicians, Certified Electronics Technician - Journeyman-Level - Communications credential is for technicians working in the electronics field. Candidates must demonstrate knowledge of two-way transceivers and how to service them. Candidates also must understand communication theory, transmitters, deviation, sensitivity, quieting, and troubleshooting. Candidates must pass a written exam.
Click here to go to Certified Electronics Technician - Journeyman-Level - Industrial COOL Snapshot page.

Renewal Period: 2 years

The International Society of Certified Electronics Technicians (ISCET), Certified Electronics Technician - Journeyman-Level – Industrial credential is for technicians working in the electronics field. Candidates must demonstrate knowledge of characteristics and applications of industrial electronic components, and the operation of devices such as triacs, SCRs, diacs, and Shockley diodes. In addition, candidates must understand transducers, transistors and op-amps operations, single-phase and three-phase control systems, motors, PLCs, and industrial electronics safety and hydraulic and pneumatic systems. Candidates must pass a written exam.

Click here to go to CompTIA Network+ ce COOL Snapshot page.

Renewal Period: 3 years

Computing Technology Industry Association (CompTIA), Network+ ce is an intermediate skill level certification for IT technicians who can describe the features and functions of networking components and manage, maintain, troubleshoot, install, operate and configure basic network infrastructure. In addition, certification holders have a basic understanding of enterprise technologies, including cloud and virtualization technologies. Network+ ce is appropriate for computer network technicians, engineers, analysts and administrators. Although not a prerequisite, it is recommended that CompTIA Network+ ce candidates have at least nine months of experience in network support or administration or academic training, along with a CompTIA A+ ce certification.
Click here to go to Air Traffic Control Tower Operator (CTO) COOL Snapshot page.

The Federal Aviation Administration (FAA), Air Traffic Control Tower Operator (CTO) certificate rates and tests professionals on ground control, tower flight data, and local control within a tower. Air Traffic Control Tower Operators control air traffic on and within the vicinity of airport and movement of air traffic between altitude sectors and control centers according to established procedures and policies. In addition, Air Traffic Control Tower Operators authorize, regulate, and control commercial airline flights according to government or company regulations to expedite and ensure flight safety. Applicants must meet eligibility requirements in accordance with Code of Federal Regulations (CFR). Applicants must pass a written and practical exam.
Click here to go to Aircraft Dispatcher COOL Snapshot page.

The Federal Aviation Administration (FAA), Aircraft Dispatcher certification is for individuals who exercise responsibility with the pilot in command in the operational control of a flight. Aircraft Dispatchers assist in planning flight paths, taking into account aircraft performance and loading; enroute winds; thunderstorm and turbulence forecasts; airspace restrictions; and airport conditions. Aircraft Dispatchers usually share responsibility for the exercise of operational control, which gives them the authority to divert, delay, or cancel a flight. Candidates must meet the training and experience eligibility requirements as listed in the Code of Federal Regulations (CFR). Candidates must pass a written and practical exam.
Click here to go to Mechanic-Inspection Authorization (IA) COOL Snapshot page.

Inspection Authorization (IA). The Federal Aviation Administration (FAA) initiated the issuance of the inspection authorization (IA) more than 35 years ago. This system of allowing qualified mechanics the privilege of performing certain inspections has served well in the maintenance of the U.S. civil fleet. The attainment of an IA and performance of the duties thereof greatly enhance the privileges and responsibilities of the aircraft mechanic. Candidates must hold a currently effective mechanic certificate with both an airframe rating and a powerplant rating, each of which is currently effective and has been in effect for a total of at least 3 years; have been actively engaged, for at least the 2-year period before the date of application, in maintaining aircraft certificated and maintained in accordance with this chapter; and must have available the equipment, facilities, and inspection data necessary to properly inspect airframes, powerplants, propellers, or any related part or appliance. Candidates must also pass a multiple-choice examination, which focuses on the ability to inspect according to safety standards for returning aircraft to service, after major repairs and major alterations and annual and progressive inspection performed. More information about the examination can be found on the FAA website.
Click here to go to CompTIA Security+ ce COOL Snapshot page.

Renewal Period: 3 years

Computing Technology Industry Association (CompTIA), Security+ ce certification designates knowledgeable professionals in the field of IT security. Security+ ce is an entry-level certification that demonstrates a candidates knowledge and skills required to install and configure systems to secure applications, networks, and devices; perform threat analysis and respond with appropriate mitigation techniques; participate in risk mitigation activities; and operate with an awareness of applicable policies, laws, and regulations. The successful candidate will perform these tasks to support the principles of confidentiality, integrity, and availability. It is recommended that candidates hold the Network+ and two years of experience in IT administration with a security focus.
Click here to go to Industrial Electronics Technician (IND) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Industrial Electronics Technician (IND) certification is an intermediate journeyman-level credential for electronics technicians. Candidates applying for the IND certification are expected to understand basic industrial electronics concepts applicable to various specialty areas of industrial electronics; Additionally, candidates must meet minimum experience requirements of at least two years working in the industry, this may include electronics training. IND candidates must be knowledgeable and have skills in the following areas: Amplifiers, Optical Wiring, Block Diagrams Schematics, Power Supplies, Test Equipment Tools, Mathematics, Computers Digital Concepts, Safety, Satellite Wireless Data, Communications, Cabling, Troubleshooting, Motors, Programmable Logic Controllers, and Software. Candidate must pass a written exam.
Click here to go to Avionics Electronics Technician (AVN) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), Avionics Electronics Technicians (AVN) certification validates the knowledge and skills of individuals who install, maintain and adjust electronics equipment, cabling and the accessories used in aviation communications and control equipment. AVNs demonstrate an understanding of avionics systems, cabling, computers and digital concepts, amplifiers, interfacing, antennas and transmission lines components, mathematics, network topologies and infrastructures, people relations, optical cabling, safety, test equipment and tools and satellite communications. Candidates must pass a written exam.
Click here to go to NCATT Aircraft Electronics Technician (AET) COOL Snapshot page.

Renewal Period: Lifetime

The ASTM International, NCATT Aircraft Electronics Technician (AET) is the primary NCATT certification and is required for ASTM International endorsements in the career field. The AET certification recognizes the knowledge base of the advanced aerospace technician and promotes integrity, safety, and professionalism in the aerospace workforce. AET knowledge and skills include basic electronics facts, terminology, and principles, common maintenance practices, fundamentals of equipment maintenance, and aircraft fundamentals. There are no AET eligibility requirements. The AET written exam is open to all individuals regardless of career field, training, education or experience.
Click here to go to Certified Technology Specialist - Installation (CTS-I) COOL Snapshot page.

Renewal Period: 3 years

A Certified Technology Specialist - Installation (CTS-I) installs and maintains audiovisual systems by following specifications, schematics, codes and safety protocols; administering installation process logistics; troubleshooting and problem-solving systems; maintaining tools and equipment; and communicating with clients, designers, other trades, other installers and staff to provide the best audiovisual solutions for client needs, on time and within budget. Applicants must agree to the terms and conditions as noted in the CTS-I Application, which includes agreement to the CTS Code of Ethics & Conduct; must have a valid CTS certification and be in good standing with the Certification Committee; and must provide third-party verification of a minimum of two years of audiovisual installation experience. Applicants must pass an examination.
Click here to go to NCATT Foreign Object Elimination (FOE) COOL Snapshot page.

Renewal Period: Lifetime

ASTM International, NCATT Foreign Object Elimination (FOE) recognizes the knowledge base of the advanced aerospace technician and promotes integrity, safety, and professionalism in the aerospace workforce. FOE knowledge and skills include housekeeping, tool accountability, hardware accountability, lost items, physical entry and personnel control, reporting and investigating, material handling, parts protections, hazardous materials, wildlife/environment, and Foreign Object Damage (FOD) effects. There are no FOE eligibility requirements. The FOE written exam is open to all individuals regardless of career field, training, education or experience. Candidates must pass the written exam.
Click here to go to NCATT Radio Communication Systems (RCS) COOL Snapshot page.

Renewal Period: Lifetime

The ASTM International, NCATT Radio Communication Systems (RCS) endorsement recognizes the knowledge base of the advanced aerospace technician and promotes integrity, safety, and professionalism in the aerospace workforce. RCS knowledge and skills include safety, radio transmitters/receivers, communication systems, and satellite communications. Candidates must hold the NCATT Aircraft Electronics Technician (AET) certification prior to taking the RCS written exam.
Click here to go to NCATT Dependent Navigation Systems (DNS) COOL Snapshot page.

Renewal Period: Lifetime

ASTM International, NCATT Dependent Navigation Systems (DNS) recognizes the knowledge base of the advanced aerospace technician and promotes integrity, safety, and professionalism in the aerospace workforce. DNS knowledge and skills include safety, antennas, Global Positioning Satellite (GPS) system, VHF Omni Directional Range (VOR) System, Distance Measurement Equipment (DME) System, Automatic Direction Finder (ADF) System, and Instrument Landing System (ILS). Candidates must hold the NCATT Aircraft Electronics Technician (AET) certification prior to taking the DNS written exam.
Click here to go to NCATT Onboard Communications & Safety Systems (OCS) COOL Snapshot page.

The ASTM International, NCATT Onboard Communication & Safety Systems Standards (OCS) certification is an intermediate-level aerospace technician credential. The OCS certification is recommended for professionals who specialize in the inspection and maintenance of aircraft communication and safety systems. To receive the OCS certification, candidates are required to pass an exam.
Click here to go to NCATT Autonomous Navigation Systems (ANS) COOL Snapshot page.

ASTM International, NCATT Autonomous Navigation Systems (ANS) is an intermediate-level aerospace technician credential. The ANS certification is recommended for professionals who specialize in autonomous navigation systems. To receive the ANS certification, candidates are required to pass an exam.
Click here to go to General Communications Technician - Level 1 (GCT1) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Technicians Association, International (ETA-I), General Communications Technician Level 1 (GCT1) certification is an entry-level credential designed to cover the many areas encountered by radio communications technicians or engineers in the public safety communications or business/commercial radio field. The GCT1 certification is modeled after wide-ranging industry communication systems encompassing more specific detailed items along with the U.S. Department of Homeland Security (DHS) guidelines covering all disciplines in the COMT program. Candidates must pass a written exam.
Click here to go to Electronics Associate DC (EM1) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate DC (EM1) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of various electrical and electronics concepts, electronic measurement equipment, electronic components, circuitry, and other related subjects specific to direct current (DC) electronics. The EM1 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Electronics Associate AC (EM2) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate AC (EM2) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of AC, safety, cabling, and other procedures. The EM2 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Electronics Associate Analog (EM3) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate Analog (EM3) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of diodes, transistors, thyristors, integrated circuits, optoelectronic devices, power supplies, basic test equipment and measurements, mathematics and formulas, amplifiers, and other related subjects. The EM3 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Electronics Associate Digital (EM4) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate Digital (EM4) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of various digital electricity and electronics concepts, numbering systems and conversions, and other related subjects. The EM4 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to Electronics Associate Comprehensive (EM5) COOL Snapshot page.

Renewal Period: 4 years

The Electronics Associate Comprehensive (EM5) is an entry-level credential designed for technicians in the electricity and electronics field. Candidates must pass a written examination testing their knowledge of soldering, desoldering, tools, electrical conductors, AC power distribution, circuit protection, circuit controls, generators, motors, interfacing of electronics products, and technician work procedures. The EM5 credential is one in a group of five credential modules; once a technician attains all five credentials, ETA will issue the Associate CET certification.
Click here to go to CompTIA IT Fundamentals (ITF+) COOL Snapshot page.

Renewal Period: Lifetime

The CompTIA IT Fundamentals (ITF+) certification is an entry level certification for those beginning a career in the field of information technology (IT) or those in a field where a general knowledge of IT is necessary.  To earn the certification, candidates must pass one exam covering foundational IT concepts such as understanding the basics of computing, IT infrastructure, software development, and database use. There are no experience requirements that must be met prior to taking the exam.
Click here to go to Microwave Radio Technician (MRT) COOL Snapshot page.

The Electronics Technicians Association (ETA-I), Microwave Radio Technician (MRT) credential is for technicians who install, align, use and maintain point-to-point microwave radio systems.  MRTs have knowledge of basic concepts, including identification and safety requirements of radio frequency. There are no prerequisites for this certification, but prior experience with radio systems and equipment is recommended.  Candidates must pass a written exam.

COOL Bucks

See your installation Education Service Officer for credential exam information and coordinating instructions.

In Demand

This certification is considered in demand. The U.S. Department of Labor sponsored CareerOneStop's analysis indicates the certification is frequently mentioned in online job postings.

Click for external link to CareerOneStop's Credentials Center.

GI Bill®

Reimbursement for exam fees has been approved for payment through the GI Bill.

Note: GI Bill approval data is updated quarterly. For the latest information, visit the WEAMS Licenses/Certifications Search page. Make sure to select "Both" in the LAC Category Type drop-down before searching.

Click to go to the external link for GI Bill licensing and certification information.

Some

Credential is related to some tasks associated with the duties of the rating (at least one critical task but less than 80%)

Most

Credential is directly related to most of the major duties associated with the rating (at least 80%)

Other

Credential is related to this military occupation, but is more advanced or specialized and therefore will likely require additional education, training, or experience

High

Highly attainable: Credential is related to the duties performed within the military occupation, the minimum education requirement = HS or less and/or minimum experience = 2 years or less experience and no additional requirements.

Medium

Moderate ease of attainment: Credential is related to the duties performed within the military occupation, the minimum education requirement = Associate's and/or prerequisite and/or minimum experience = more than 2 years and less than 10 years of experience.

Low

May be difficult to attain: Credential is related to the duties performed within the military occupation, the minimum education requirement is a Bachelor's degree, and/or minimum experience is 10 or more years.

Most – Tasks in these careers match most duties of the military job or specialty (approximately 80% or greater)
Some – Tasks in these careers match some duties of the military job or specialty (greater than 20% but less than 80%)
Bright Outlook – new job opportunities are very likely in the future for this job

Registered Apprenticeship

An apprenticeship program is registered with the U.S. Department of Labor. Go to the Apprenticeship Finder and enter career path or location to find apprenticeship opportunities.

Click here for the external link to: My Next Move for Veterans - Airfield Operations Specialists
Click here for the external link to: My Next Move salary info for Airfield Operations Specialists

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Airfield Operations Specialists

Click here for the external link to: My Next Move for Veterans - Avionics Technicians
Click here for the external link to: My Next Move salary info for Avionics Technicians

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Avionics Technicians

Click here for the external link to: My Next Move for Veterans - Electrical and Electronics Repairers, Commercial and Industrial Equipment
Click here for the external link to: My Next Move salary info for Electrical and Electronics Repairers, Commercial and Industrial Equipment

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Electrical and Electronics Repairers, Commercial and Industrial Equipment

Click here for the external link to: My Next Move for Veterans - Electronics Engineering Technicians
Click here for the external link to: My Next Move salary info for Electronics Engineering Technicians

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Electronics Engineering Technicians

Click here for the external link to: My Next Move for Veterans - First-Line Supervisors of Mechanics, Installers, and Repairers
Click here for the external link to: My Next Move salary info for First-Line Supervisors of Mechanics, Installers, and Repairers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for First-Line Supervisors of Mechanics, Installers, and Repairers

Click here for the external link to: My Next Move for Veterans - Helpers--Installation, Maintenance, and Repair Workers
Click here for the external link to: My Next Move salary info for Helpers--Installation, Maintenance, and Repair Workers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Helpers--Installation, Maintenance, and Repair Workers

Click here for the external link to: My Next Move for Veterans - Maintenance and Repair Workers, General
Click here for the external link to: My Next Move salary info for Maintenance and Repair Workers, General

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Maintenance and Repair Workers, General

Click here for the external link to: My Next Move for Veterans - Maintenance Workers, Machinery
Click here for the external link to: My Next Move salary info for Maintenance Workers, Machinery

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Maintenance Workers, Machinery

Click here for the external link to: My Next Move for Veterans - Telecommunications Equipment Installers and Repairers, Except Line Installers
Click here for the external link to: My Next Move salary info for Telecommunications Equipment Installers and Repairers, Except Line Installers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Telecommunications Equipment Installers and Repairers, Except Line Installers

Click here for the external link to: My Next Move for Veterans - Telecommunications Line Installers and Repairers
Click here for the external link to: My Next Move salary info for Telecommunications Line Installers and Repairers

Bright Outlook – new job opportunities are very likely in the future for this job

Click here for external link to: My Next Move for Veterans State Map for Telecommunications Line Installers and Repairers

This credential has been accredited by:
This credential has been accredited by: